2009/12/03

CF-R7でChrome OSを起動させてみた

Google Chrome OSをUSBメモリから起動する方法 : ライフハッカー[日本版], 仕事も生活も上手くこなすライフハック情報満載のブログ・メディア に従い、USBメモリ上にChrome OSを入れてみた。使用したのはBUFFALO マイクロUSBメモリー ブラック 4GB RUF2-PS4G-BK

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30-chromeos-intel-menlow (jsierra@ubuntu.local) (gcc version 4.4.0 (Ubuntu 4.4.0-8ubuntu2) ) #1 SMP Fri Nov 20 02:53:44 UTC 2009 (1)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f6c0000 (usable)
[    0.000000]  BIOS-e820: 000000007f6c0000 - 000000007f6d1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f6d1000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x7f6c0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-E3FFF write-back
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f6c0000 (usable)
[    0.000000]  modified: 000000007f6c0000 - 000000007f6d1000 (ACPI NVS)
[    0.000000]  modified: 000000007f6d1000 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 7f43a000 - 7f6be4d9
[    0.000000] Allocated new RAMDISK: 00100000 - 003844d9
[    0.000000] Move RAMDISK from 000000007f43a000 - 000000007f6be4d8 to 00100000 - 003844d8
[    0.000000] ACPI: RSDP 000f8190 00024 (v02 MATBIO)
[    0.000000] ACPI: XSDT 7f6c3553 0007C (v01 MATBIO CFR7-1   06040000 MEI  00000000)
[    0.000000] ACPI: FACP 7f6cdc60 000F4 (v03 MATBIO CFR7-1   06040000 MEI  00000001)
[    0.000000] ACPI: DSDT 7f6c489a 09342 (v01 MATBIO   CFR7-1 06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 7f6d0fc0 00040
[    0.000000] ACPI: HPET 7f6cdd54 00038 (v01 MATBIO CFR7-1   06040000 MEI  0000005A)
[    0.000000] ACPI: SLIC 7f6cdd8c 00176 (v01 MATBIO CFR7-1   06040000 MEI  00000000)
[    0.000000] ACPI: APIC 7f6cdf02 00068 (v01 MATBIO CFR7-1   06040000 MEI  00000000)
[    0.000000] ACPI: MCFG 7f6cdf6a 0003C (v01 MATBIO CFR7-1   06040000 MEI  00000000)
[    0.000000] ACPI: BOOT 7f6cdfa6 00028 (v01 MATBIO CFR7-1   06040000 MEI  00000001)
[    0.000000] ACPI: TCPA 7f6cdfce 00032 (v01 MATBIO CFR7-1   06040000 MEI  00000001)
[    0.000000] ACPI: SSDT 7f6c459f 002FB (v01 MATBIO CFR7-1   00001000 MEI  20050624)
[    0.000000] ACPI: SSDT 7f6c3b5b 0025F (v01 MATBIO CFR7-1   00003000 MEI  20050624)
[    0.000000] ACPI: SSDT 7f6c3ab5 000A6 (v01 MATBIO CFR7-1   00003000 MEI  20050624)
[    0.000000] ACPI: SSDT 7f6c35cf 004E6 (v01 MATBIO CFR7-1   00003000 MEI  20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00015a506c]    TEXT DATA BSS ==> [0001000000 - 00015a506c]
[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #5 [00015a6000 - 00015ac19c]              BRK ==> [00015a6000 - 00015ac19c]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [0000100000 - 00003844d9]      NEW RAMDISK ==> [0000100000 - 00003844d9]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00f81c0] f81c0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f6c0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f6c0
[    0.000000] On node 0 totalpages: 521807
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2302 pages used for memmap
[    0.000000]   HighMem zone: 292292 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
[    0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 11 pages at c25b8000, static data 23740 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517729
[    0.000000] Kernel command line: quiet console=tty2 initrd=initrd.img init=/sbin/init boot=local rootwait root=LABEL=C-ROOT ro noresume noswap i915.modeset=1 loglevel=1 BOOT_IMAGE=vmlinuz 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Experimental hierarchical RCU implementation.
[    0.000000] Experimental hierarchical RCU init done.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[    0.000000] Detected 1064.058 MHz processor.
[    0.000999] Console: colour dummy device 80x25
[    0.000999] console [tty2] enabled
[    0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000999] allocated 10485760 bytes of page_cgroup
[    0.000999] please try cgroup_disable=memory option if you don't want
[    0.000999] Initializing HighMem for node 0 (000377fe:0007f6c0)
[    0.000999] Memory: 2050472k/2087680k available (3098k kernel code, 35968k reserved, 1631k data, 316k init, 1178376k highmem)
[    0.000999] virtual kernel memory layout:
[    0.000999]     fixmap  : 0xfff83000 - 0xfffff000   ( 496 kB)
[    0.000999]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000999]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000999]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000999]       .init : 0xc14a6000 - 0xc14f5000   ( 316 kB)
[    0.000999]       .data : 0xc1306bed - 0xc149e9e0   (1631 kB)
[    0.000999]       .text : 0xc1000000 - 0xc1306bed   (3098 kB)
[    0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000999] hpet clockevent registered
[    0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 2128.11 BogoMIPS (lpj=1064058)
[    0.000999] Security Framework initialized
[    0.000999] TOMOYO Linux initialized
[    0.000999] Mount-cache hash table entries: 512
[    0.000999] Initializing cgroup subsys ns
[    0.000999] Initializing cgroup subsys cpuacct
[    0.000999] Initializing cgroup subsys memory
[    0.000999] Initializing cgroup subsys devices
[    0.000999] Initializing cgroup subsys freezer
[    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000999] CPU: L2 cache: 2048K
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 0
[    0.000999] Intel machine check architecture supported.
[    0.000999] Intel machine check reporting enabled on CPU#0.
[    0.000999] using mwait in idle threads.
[    0.000999] Checking 'hlt' instruction... OK.
[    0.004550] ACPI: Core revision 20090320
[    0.021519] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.031772] CPU0: Intel(R) Core(TM)2 Duo CPU     U7500  @ 1.06GHz stepping 0d
[    0.031995] Booting processor 1 APIC 0x1 ip 0x6000
[    0.000999] Initializing CPU#1
[    0.000999] Calibrating delay using timer specific routine.. 2127.91 BogoMIPS (lpj=1063957)
[    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000999] CPU: L2 cache: 2048K
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 1
[    0.000999] Intel machine check architecture supported.
[    0.000999] Intel machine check reporting enabled on CPU#1.
[    0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.103930] CPU1: Intel(R) Core(TM)2 Duo CPU     U7500  @ 1.06GHz stepping 0d
[    0.103950] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.104988] Brought up 2 CPUs
[    0.104993] Total of 2 processors activated (4256.03 BogoMIPS).
[    0.105102] khelper used greatest stack depth: 7152 bytes left
[    0.105102] net_namespace: 1028 bytes
[    0.105990] Time: 23:21:05  Date: 12/02/09
[    0.106062] NET: Registered protocol family 16
[    0.106087] ACPI: bus type pci registered
[    0.107056] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.107062] PCI: MCFG area at f8000000 reserved in E820
[    0.107065] PCI: Using MMCONFIG for extended config space
[    0.107069] PCI: Using configuration type 1 for base access
[    0.114019] bio: create slab  at 0
[    0.116393] ACPI: EC: Look up EC in DSDT
[    0.125744] ACPI: BIOS _OSI(Linux) query ignored
[    0.133049] ACPI: BIOS _OSI(Linux) query ignored
[    0.135014] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.142268] ACPI: Interpreter enabled
[    0.142288] ACPI: (supports S0 S3 S4 S5)
[    0.142321] ACPI: Using IOAPIC for interrupt routing
[    0.190160] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.190164] ACPI: EC: driver started in interrupt mode
[    0.191470] ACPI: No dock devices found.
[    0.191491] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.191536] pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff]
[    0.191536] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[    0.191536] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[    0.191536] pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff]
[    0.191536] pci 0000:00:04.0: reg 10 64bit mmio: [0xfc600000-0xfc603fff]
[    0.192180] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[    0.192363] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[    0.192564] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc608800-0xfc608bff]
[    0.192743] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.192756] pci 0000:00:1a.7: PME# disabled
[    0.192905] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc604000-0xfc607fff]
[    0.193086] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.193098] pci 0000:00:1b.0: PME# disabled
[    0.193332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.193344] pci 0000:00:1c.0: PME# disabled
[    0.193595] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.193607] pci 0000:00:1c.2: PME# disabled
[    0.193852] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.193864] pci 0000:00:1c.3: PME# disabled
[    0.194111] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.194120] pci 0000:00:1c.4: PME# disabled
[    0.194305] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[    0.194487] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[    0.194670] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[    0.194866] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc608c00-0xfc608fff]
[    0.195047] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.195059] pci 0000:00:1d.7: PME# disabled
[    0.195476] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.195486] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.195495] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.195639] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.195659] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.195681] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.195702] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.195723] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[    0.195932] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
[    0.195953] pci 0000:00:1f.2: reg 14 io port: [0x18d0-0x18d3]
[    0.195976] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
[    0.195997] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[    0.196018] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[    0.196040] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc608000-0xfc6087ff]
[    0.196159] pci 0000:00:1f.2: PME# supported from D3hot
[    0.196171] pci 0000:00:1f.2: PME# disabled
[    0.196263] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[    0.196329] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[    0.196941] pci 0000:03:00.0: reg 10 64bit mmio: [0xfc300000-0xfc301fff]
[    0.197336] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.197359] pci 0000:03:00.0: PME# disabled
[    0.198264] pci 0000:00:1c.2: bridge 32bit mmio: [0xfc300000-0xfc3fffff]
[    0.198950] pci 0000:05:00.0: reg 10 64bit mmio: [0xfc200000-0xfc203fff]
[    0.199021] pci 0000:05:00.0: reg 18 io port: [0x2000-0x20ff]
[    0.199230] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.199564] pci 0000:05:00.0: supports D1 D2
[    0.199568] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.199598] pci 0000:05:00.0: PME# disabled
[    0.202709] pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
[    0.202721] pci 0000:00:1c.4: bridge 32bit mmio: [0xfc200000-0xfc2fffff]
[    0.202856] pci 0000:06:00.0: reg 10 32bit mmio: [0xdbfff000-0xdbffffff]
[    0.202922] pci 0000:06:00.0: supports D1 D2
[    0.202926] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.202939] pci 0000:06:00.0: PME# disabled
[    0.203060] pci 0000:06:00.1: reg 10 32bit mmio: [0xdbffec00-0xdbffecff]
[    0.203229] pci 0000:06:00.1: supports D1 D2
[    0.203233] pci 0000:06:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.203246] pci 0000:06:00.1: PME# disabled
[    0.203449] pci 0000:00:1e.0: transparent bridge
[    0.203461] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
[    0.203474] pci 0000:00:1e.0: bridge 32bit mmio: [0xdbf00000-0xe1ffffff]
[    0.203636] pci_bus 0000:00: on NUMA node 0
[    0.203647] ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0._PRT]
[    0.203972] ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.RP01._PRT]
[    0.204130] ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.RP03._PRT]
[    0.204283] ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.RP04._PRT]
[    0.204434] ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.RP05._PRT]
[    0.204610] ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.PCIB._PRT]
[    0.213085] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 *7 11)
[    0.213286] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *11)
[    0.213482] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 7 *11)
[    0.213676] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 *11)
[    0.213874] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 11) *0, disabled.
[    0.214076] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 6 7 11)
[    0.214274] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[    0.214464] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 *11)
[    0.215015] SCSI subsystem initialized
[    0.215102] libata version 3.00 loaded.
[    0.215122] usbcore: registered new interface driver usbfs
[    0.215122] usbcore: registered new interface driver hub
[    0.215122] usbcore: registered new device driver usb
[    0.216101] PCI: Using ACPI for IRQ routing
[    0.216117] pci 0000:00:02.0: BAR 2: can't allocate resource
[    0.218994] NetLabel: Initializing
[    0.218998] NetLabel:  domain hash size = 128
[    0.219000] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.219022] NetLabel:  unlabeled traffic allowed by default
[    0.219055] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.219055] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.226976] pnp: PnP ACPI init
[    0.226989] ACPI: bus type pnp registered
[    0.232479] pnp 00:01: mem resource (0xcee00-0xcefff) overlaps 0000:00:02.0 BAR 2 (0x0-0xfffffff), disabling
[    0.239233] pnp: PnP ACPI: found 12 devices
[    0.239238] ACPI: ACPI bus type pnp unregistered
[    0.239259] system 00:02: ioport range 0x900-0x91f has been reserved
[    0.239265] system 00:02: ioport range 0x92c-0x97f has been reserved
[    0.239271] system 00:02: ioport range 0xfe00-0xfe01 has been reserved
[    0.239277] system 00:02: iomem range 0xff000000-0xffffffff has been reserved
[    0.239289] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.239301] system 00:06: ioport range 0x800-0x80f has been reserved
[    0.239306] system 00:06: ioport range 0x1000-0x107f has been reserved
[    0.239312] system 00:06: ioport range 0x1180-0x11bf has been reserved
[    0.239318] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.239324] system 00:06: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.239329] system 00:06: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.239335] system 00:06: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.239341] system 00:06: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.239347] system 00:06: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.239352] system 00:06: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.239358] system 00:06: iomem range 0xfef00000-0xfef03fff has been reserved
[    0.274911] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.274915] pci 0000:00:1c.0:   IO window: disabled
[    0.274931] pci 0000:00:1c.0:   MEM window: disabled
[    0.274942] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.274968] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[    0.274972] pci 0000:00:1c.2:   IO window: disabled
[    0.274989] pci 0000:00:1c.2:   MEM window: 0xfc300000-0xfc3fffff
[    0.275001] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.275022] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[    0.275026] pci 0000:00:1c.3:   IO window: disabled
[    0.275042] pci 0000:00:1c.3:   MEM window: disabled
[    0.275053] pci 0000:00:1c.3:   PREFETCH window: disabled
[    0.275074] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[    0.275083] pci 0000:00:1c.4:   IO window: 0x2000-0x2fff
[    0.275099] pci 0000:00:1c.4:   MEM window: 0xfc200000-0xfc2fffff
[    0.275112] pci 0000:00:1c.4:   PREFETCH window: 0x0000008c000000-0x0000008c0fffff
[    0.275134] pci 0000:06:00.0: CardBus bridge, secondary bus 0000:07
[    0.275139] pci 0000:06:00.0:   IO window: 0x003000-0x0030ff
[    0.275151] pci 0000:06:00.0:   IO window: 0x003400-0x0034ff
[    0.275165] pci 0000:06:00.0:   PREFETCH window: 0x88000000-0x8bffffff
[    0.275179] pci 0000:06:00.0:   MEM window: 0xdc000000-0xdfffffff
[    0.275192] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.275200] pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
[    0.275217] pci 0000:00:1e.0:   MEM window: 0xdbf00000-0xe1ffffff
[    0.275229] pci 0000:00:1e.0:   PREFETCH window: 0x00000088000000-0x0000008bffffff
[    0.275265]   alloc irq_desc for 17 on cpu 0 node 0
[    0.275269]   alloc kstat_irqs on cpu 0 node 0
[    0.275277] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.275291] pci 0000:00:1c.0: setting latency timer to 64
[    0.275313]   alloc irq_desc for 18 on cpu 0 node 0
[    0.275316]   alloc kstat_irqs on cpu 0 node 0
[    0.275323] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.275336] pci 0000:00:1c.2: setting latency timer to 64
[    0.275357]   alloc irq_desc for 19 on cpu 0 node 0
[    0.275360]   alloc kstat_irqs on cpu 0 node 0
[    0.275367] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.275379] pci 0000:00:1c.3: setting latency timer to 64
[    0.275401] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.275411] pci 0000:00:1c.4: setting latency timer to 64
[    0.275431] pci 0000:00:1e.0: setting latency timer to 64
[    0.275455]   alloc irq_desc for 22 on cpu 0 node 0
[    0.275458]   alloc kstat_irqs on cpu 0 node 0
[    0.275465] pci 0000:06:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.275480] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.275484] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.275490] pci_bus 0000:03: resource 1 mem: [0xfc300000-0xfc3fffff]
[    0.275495] pci_bus 0000:05: resource 0 io:  [0x2000-0x2fff]
[    0.275500] pci_bus 0000:05: resource 1 mem: [0xfc200000-0xfc2fffff]
[    0.275505] pci_bus 0000:05: resource 2 pref mem [0x8c000000-0x8c0fffff]
[    0.275510] pci_bus 0000:06: resource 0 io:  [0x3000-0x3fff]
[    0.275514] pci_bus 0000:06: resource 1 mem: [0xdbf00000-0xe1ffffff]
[    0.275519] pci_bus 0000:06: resource 2 pref mem [0x88000000-0x8bffffff]
[    0.275524] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.275528] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[    0.275533] pci_bus 0000:07: resource 0 io:  [0x3000-0x30ff]
[    0.275538] pci_bus 0000:07: resource 1 io:  [0x3400-0x34ff]
[    0.275543] pci_bus 0000:07: resource 2 pref mem [0x88000000-0x8bffffff]
[    0.275548] pci_bus 0000:07: resource 3 mem: [0xdc000000-0xdfffffff]
[    0.275595] NET: Registered protocol family 2
[    0.283048] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.283509] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.284172] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.284498] TCP: Hash tables configured (established 131072 bind 65536)
[    0.284503] TCP reno registered
[    0.286068] NET: Registered protocol family 1
[    0.286151] Trying to unpack rootfs image as initramfs...
[    0.418438] Freeing initrd memory: 2577k freed
[    0.420601] Simple Boot Flag at 0x46 set to 0x1
[    0.422166] Microcode Update Driver: v2.00 , Peter Oruba
[    0.422171] Scanning for low memory corruption every 60 seconds
[    0.422577] audit: initializing netlink socket (disabled)
[    0.422596] type=2000 audit(1259796064.421:1): initialized
[    0.440552] highmem bounce pool size: 64 pages
[    0.440561] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.446532] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.446735] msgmni has been set to 1709
[    0.447420] alg: No test for stdrng (krng)
[    0.447600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.447606] io scheduler noop registered
[    0.447610] io scheduler anticipatory registered
[    0.447614] io scheduler deadline registered
[    0.447724] io scheduler cfq registered (default)
[    0.447745] pci 0000:00:02.0: Boot video device
[    0.448383]   alloc irq_desc for 24 on cpu 0 node 0
[    0.448388]   alloc kstat_irqs on cpu 0 node 0
[    0.448414] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.448465] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.449035]   alloc irq_desc for 25 on cpu 0 node 0
[    0.449039]   alloc kstat_irqs on cpu 0 node 0
[    0.449061] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X
[    0.449112] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.449647]   alloc irq_desc for 26 on cpu 0 node 0
[    0.449651]   alloc kstat_irqs on cpu 0 node 0
[    0.449674] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
[    0.449723] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    0.450254]   alloc irq_desc for 27 on cpu 0 node 0
[    0.450258]   alloc kstat_irqs on cpu 0 node 0
[    0.450280] pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
[    0.450330] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    0.450773] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.451328] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.454159] ACPI: AC Adapter [AC] (on-line)
[    0.454431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.454436] ACPI: Power Button [PWRF]
[    0.454581] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.465006] ACPI: Lid Switch [LID]
[    0.465143] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.465148] ACPI: Power Button [PWRB]
[    0.465892] ACPI: SSDT 7f6c42dc 001FB (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.466466] ACPI: SSDT 7f6c3dba 0049D (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.469850] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
[    0.470394] Monitor-Mwait will be used to enter C-1 state
[    0.470440] Monitor-Mwait will be used to enter C-2 state
[    0.470482] Monitor-Mwait will be used to enter C-3 state
[    0.470497] Marking TSC unstable due to TSC halts in idle
[    0.470548] Switched to high resolution mode on CPU 0
[    0.470620] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.470713] processor ACPI_CPU:00: registered as cooling_device0
[    0.470720] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.470946] Switched to high resolution mode on CPU 1
[    0.471300] ACPI: SSDT 7f6c44d7 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.471814] ACPI: SSDT 7f6c4257 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.472737] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
[    0.473597] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.473692] processor ACPI_CPU:01: registered as cooling_device1
[    0.473699] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.488129] thermal LNXTHERM:01: registered as thermal_zone0
[    0.488144] ACPI: Thermal Zone [TZ00] (66 C)
[    0.490153] thermal LNXTHERM:02: registered as thermal_zone1
[    0.490167] ACPI: Thermal Zone [TZ01] (69 C)
[    0.492934] khelper used greatest stack depth: 6976 bytes left
[    0.497891] Non-volatile memory driver v1.3
[    0.498170] Linux agpgart interface v0.103
[    0.498194] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    0.499341] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    0.503916] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x90000000
[    0.504014] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.509039] brd: module loaded
[    0.510587] loop: module loaded
[    0.510797] Driver 'sd' needs updating - please use bus_type methods
[    0.511030] ahci 0000:00:1f.2: version 3.0
[    0.511089] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.511181]   alloc irq_desc for 28 on cpu 0 node 0
[    0.511185]   alloc kstat_irqs on cpu 0 node 0
[    0.511210] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    0.511392] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    0.511399] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
[    0.511442] ahci 0000:00:1f.2: setting latency timer to 64
[    0.511931] scsi0 : ahci
[    0.512360] scsi1 : ahci
[    0.512651] scsi2 : ahci
[    0.513057] ata1: SATA max UDMA/133 abar m2048@0xfc608000 port 0xfc608100 irq 28
[    0.513065] ata2: SATA max UDMA/133 abar m2048@0xfc608000 port 0xfc608180 irq 28
[    0.513073] ata3: SATA max UDMA/133 abar m2048@0xfc608000 port 0xfc608200 irq 28
[    0.513232] ata_piix 0000:00:1f.1: version 2.13
[    0.513322] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.513386] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.513498] scsi3 : ata_piix
[    0.513812] scsi4 : ata_piix
[    0.515170] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.515176] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.515767] console [netcon0] enabled
[    0.515771] netconsole: network logging started
[    0.515915] [drm] Initialized drm 1.1.0 20060810
[    0.515947]   alloc irq_desc for 16 on cpu 0 node 0
[    0.515951]   alloc kstat_irqs on cpu 0 node 0
[    0.515959] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.515966] i915 0000:00:02.0: setting latency timer to 64
[    0.520214]   alloc irq_desc for 29 on cpu 0 node 0
[    0.520219]   alloc kstat_irqs on cpu 0 node 0
[    0.520233] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[    0.545000] i2c-adapter i2c-1: unable to read EDID block.
[    0.612756] ACPI: Battery Slot [BATA] (battery present)
[    0.634515] i2c-adapter i2c-1: unable to read EDID block.
[    0.677116] i915 0000:00:02.0: LVDS-1: no EDID data
[    0.683968] acpi device:04: registered as cooling_device2
[    0.684975] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input3
[    0.684987] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.685088] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.685186] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.685223] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.685245] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.685277] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.685383] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.689322] ehci_hcd 0000:00:1a.7: debug port 1
[    0.689339] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.689362] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc608800
[    0.699278] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.699310] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.699315] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.699319] usb usb1: Product: EHCI Host Controller
[    0.699324] usb usb1: Manufacturer: Linux 2.6.30-chromeos-intel-menlow ehci_hcd
[    0.699328] usb usb1: SerialNumber: 0000:00:1a.7
[    0.699482] usb usb1: configuration #1 chosen from 1 choice
[    0.699598] hub 1-0:1.0: USB hub found
[    0.699609] hub 1-0:1.0: 4 ports detected
[    0.699960]   alloc irq_desc for 23 on cpu 0 node 0
[    0.699964]   alloc kstat_irqs on cpu 0 node 0
[    0.699973] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.699994] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.700002] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.700097] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.704031] ehci_hcd 0000:00:1d.7: debug port 1
[    0.704047] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.704070] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc608c00
[    0.713277] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.713303] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.713308] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.713313] usb usb2: Product: EHCI Host Controller
[    0.713317] usb usb2: Manufacturer: Linux 2.6.30-chromeos-intel-menlow ehci_hcd
[    0.713322] usb usb2: SerialNumber: 0000:00:1d.7
[    0.713463] usb usb2: configuration #1 chosen from 1 choice
[    0.713571] hub 2-0:1.0: USB hub found
[    0.713581] hub 2-0:1.0: 6 ports detected
[    0.713918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.714002] uhci_hcd: USB Universal Host Controller Interface driver
[    0.714049] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.714065] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.714072] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.714167] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.714224] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    0.714303] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.714308] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.714313] usb usb3: Product: UHCI Host Controller
[    0.714316] usb usb3: Manufacturer: Linux 2.6.30-chromeos-intel-menlow uhci_hcd
[    0.714321] usb usb3: SerialNumber: 0000:00:1a.0
[    0.714454] usb usb3: configuration #1 chosen from 1 choice
[    0.714560] hub 3-0:1.0: USB hub found
[    0.714570] hub 3-0:1.0: 2 ports detected
[    0.714819]   alloc irq_desc for 21 on cpu 0 node 0
[    0.714823]   alloc kstat_irqs on cpu 0 node 0
[    0.714831] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.714845] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.714853] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.714946] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.715002] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[    0.715058] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.715063] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.715068] usb usb4: Product: UHCI Host Controller
[    0.715072] usb usb4: Manufacturer: Linux 2.6.30-chromeos-intel-menlow uhci_hcd
[    0.715077] usb usb4: SerialNumber: 0000:00:1a.1
[    0.715215] usb usb4: configuration #1 chosen from 1 choice
[    0.716443] hub 4-0:1.0: USB hub found
[    0.716453] hub 4-0:1.0: 2 ports detected
[    0.718897] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.718912] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.718920] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.720073] i2c-adapter i2c-1: unable to read EDID block.
[    0.720126] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.720169] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.720225] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.720230] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.720234] usb usb5: Product: UHCI Host Controller
[    0.720239] usb usb5: Manufacturer: Linux 2.6.30-chromeos-intel-menlow uhci_hcd
[    0.720243] usb usb5: SerialNumber: 0000:00:1d.0
[    0.720404] usb usb5: configuration #1 chosen from 1 choice
[    0.720507] hub 5-0:1.0: USB hub found
[    0.720517] hub 5-0:1.0: 2 ports detected
[    0.720766] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.720781] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.720789] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.720882] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.720938] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.720993] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.720998] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.721003] usb usb6: Product: UHCI Host Controller
[    0.721007] usb usb6: Manufacturer: Linux 2.6.30-chromeos-intel-menlow uhci_hcd
[    0.721012] usb usb6: SerialNumber: 0000:00:1d.1
[    0.721145] usb usb6: configuration #1 chosen from 1 choice
[    0.721248] hub 6-0:1.0: USB hub found
[    0.721279] hub 6-0:1.0: 2 ports detected
[    0.721537] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.721552] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.721560] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.721651] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.721694] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.721747] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.721752] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.721757] usb usb7: Product: UHCI Host Controller
[    0.721761] usb usb7: Manufacturer: Linux 2.6.30-chromeos-intel-menlow uhci_hcd
[    0.721765] usb usb7: SerialNumber: 0000:00:1d.2
[    0.721908] usb usb7: configuration #1 chosen from 1 choice
[    0.722012] hub 7-0:1.0: USB hub found
[    0.722022] hub 7-0:1.0: 2 ports detected
[    0.722384] Initializing USB Mass Storage driver...
[    0.722501] usbcore: registered new interface driver usb-storage
[    0.722506] USB Mass Storage support registered.
[    0.722623] usbcore: registered new interface driver libusual
[    0.722822] PNP: PS/2 Controller [PNP0303:K106,PNP0f13:MOU3] at 0x60,0x64 irq 1,12
[    0.725206] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.726919] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.726929] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.726936] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.726943] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.726949] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.727118] mice: PS/2 mouse device common for all mice
[    0.728275] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    0.728962] cpuidle: using governor ladder
[    0.730166] cpuidle: using governor menu
[    0.730622] usbcore: registered new interface driver hiddev
[    0.730718] usbcore: registered new interface driver usbhid
[    0.730722] usbhid: v2.6:USB HID core driver
[    0.730746] Netfilter messages via NETLINK v0.30.
[    0.730777] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    0.731236] ctnetlink v0.93: registering with nfnetlink.
[    0.732334] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.732370] TCP cubic registered
[    0.732373] Initializing XFRM netlink socket
[    0.733030] NET: Registered protocol family 10
[    0.734356] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.734451] IPv6 over IPv4 tunneling driver
[    0.735578] NET: Registered protocol family 17
[    0.736633] Using IPI No-Shortcut mode
[    0.736999] registered taskstats version 1
[    0.737224]   Magic number: 5:450:402
[    0.737298] pci 0000:03:00.0: hash matches
[    0.756231] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.809591] i2c-adapter i2c-1: unable to read EDID block.
[    0.819469] ata2: SATA link down (SStatus 0 SControl 300)
[    0.822067] ata3: SATA link down (SStatus 0 SControl 300)
[    0.852176] i915 0000:00:02.0: LVDS-1: no EDID data
[    0.859221] allocated 1024x768 fb: 0x007df000, bo f689fd20
[    0.920625] [drm] LVDS-8: set mode 1024x768 a
[    0.946547] Console: switching to colour frame buffer device 128x48
[    0.952290] fb0: inteldrmfb frame buffer device
[    0.952294] registered panic notifier
[    0.952348] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.953145] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    0.953152] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 filtered out
[    1.054085] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    1.169418] usb 2-2: New USB device found, idVendor=13fe, idProduct=2240
[    1.169426] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.169432] usb 2-2: Product: USB Carder      
[    1.169438] usb 2-2: Manufacturer:         
[    1.169443] usb 2-2: SerialNumber: 123456789ABC
[    1.169630] usb 2-2: configuration #1 chosen from 1 choice
[    1.170048] scsi5 : SCSI emulation for USB Mass Storage devices
[    1.170397] usb-storage: device found at 2
[    1.170401] usb-storage: waiting for device to settle before scanning
[    1.293249] ata1.00: ATA-7: TOSHIBA MK8037GSX, DL231F, max UDMA/100
[    1.293258] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.294456] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    1.294463] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 filtered out
[    1.294663] ata1.00: configured for UDMA/100
[    1.305242] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
[    1.305740] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.305760] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[    1.305786] sd 0:0:0:0: [sda] Write Protect is off
[    1.305791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.305831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.305988]  sda: sda1 sda2
[    1.351369] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.470609] Freeing unused kernel memory: 316k freed
[    1.470874] Write protecting the kernel text: 3100k
[    1.470967] Write protecting the kernel read-only data: 1388k
[    1.480780] exe used greatest stack depth: 6936 bytes left
[    1.528516] exe used greatest stack depth: 6736 bytes left
[    1.550326] kbd_mode used greatest stack depth: 6660 bytes left
[    1.628489] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x39a0b2, caps: 0xa04753/0x200000
[    1.666766] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[    1.726942] blacklist used greatest stack depth: 6564 bytes left
[    1.775224] udevadm used greatest stack depth: 6492 bytes left
[    1.835650] sky2 driver version 1.22
[    1.835778] sky2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.835815] sky2 0000:05:00.0: setting latency timer to 64
[    1.835923] sky2 0000:05:00.0: Yukon-2 EC Ultra chip revision 3
[    1.836685]   alloc irq_desc for 30 on cpu 0 node 0
[    1.836689]   alloc kstat_irqs on cpu 0 node 0
[    1.836773] sky2 0000:05:00.0: irq 30 for MSI/MSI-X
[    1.840454] sky2 eth0: addr 00:0b:97:dc:e9:37
[    1.840591] modprobe used greatest stack depth: 6392 bytes left
[    2.351270] async/0 used greatest stack depth: 5668 bytes left
[    2.501273] Clocksource tsc unstable (delta = -335662634 ns)
[    6.170983] scsi 5:0:0:0: Direct-Access              USB Reader       0001 PQ: 0 ANSI: 0 CCS
[    6.171202] sd 5:0:0:0: Attached scsi generic sg1 type 0
[    6.171713] usb-storage: device scan complete
[    7.110570] sd 5:0:0:0: [sdb] 7843840 512-byte hardware sectors: (4.01 GB/3.74 GiB)
[    7.111308] sd 5:0:0:0: [sdb] Write Protect is off
[    7.111316] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    7.111322] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    7.113933] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    7.113940]  sdb: sdb1 sdb2 sdb3
[    7.117390] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[    7.343515] kjournald starting.  Commit interval 15 seconds
[    7.343537] EXT3-fs: mounted filesystem with writeback data mode.
[    7.373355] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
[    7.752803] kjournald starting.  Commit interval 15 seconds
[    7.963086] EXT3 FS on sdb1, internal journal
[    7.963097] EXT3-fs: mounted filesystem with writeback data mode.
[    9.515001] sky2 eth0: enabling interface
[    9.515279] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.986850] i2c-adapter i2c-1: unable to read EDID block.
[   10.076407] i2c-adapter i2c-1: unable to read EDID block.
[   10.119155] i915 0000:00:02.0: LVDS-1: no EDID data
[   10.169766] i2c-adapter i2c-1: unable to read EDID block.
[   10.257765] i2c-adapter i2c-1: unable to read EDID block.
[   10.300352] i915 0000:00:02.0: LVDS-1: no EDID data
[   11.172564] i2c-adapter i2c-1: unable to read EDID block.
[   11.261771] i2c-adapter i2c-1: unable to read EDID block.
[   11.304371] i915 0000:00:02.0: LVDS-1: no EDID data
[   13.028752] udev: starting version 145
[   13.321554] input: Panasonic Laptop Support as /devices/virtual/input/input6
[   13.328567] rtc_cmos 00:07: RTC can wake from S4
[   13.328659] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[   13.328711] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[   13.444358] cfg80211: Using static regulatory domain info
[   13.444363] cfg80211: Regulatory domain: US
[   13.444366]  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.444372]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[   13.444378]  (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.444383]  (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.444388]  (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.444394]  (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.444399]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[   13.446500] cfg80211: Calling CRDA for country: US
[   13.620736] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[   13.620741] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   13.620869] iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   13.620908] iwlagn 0000:03:00.0: setting latency timer to 64
[   13.620966] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[   13.669202] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   13.670047]   alloc irq_desc for 31 on cpu 0 node 0
[   13.670052]   alloc kstat_irqs on cpu 0 node 0
[   13.670088] iwlagn 0000:03:00.0: irq 31 for MSI/MSI-X
[   13.679299] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   13.683616] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
[   13.785582] iwlagn 0000:03:00.0: iwlwifi-4965-2.ucode firmware file req failed: -2
[   13.785590] iwlagn 0000:03:00.0: Could not read microcode: -2
[   13.973092] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   13.973109] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.973163] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   48.871106] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   48.871182] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   56.637133] padlock: VIA PadLock Hash Engine not detected.
[   57.334662] EXT4-fs: barriers enabled
[   57.334890] kjournald2 starting: pid 2056, dev dm-0:8, commit interval 5 seconds
[   57.335740] EXT4 FS on dm-0, internal journal on dm-0:8
[   57.335745] EXT4-fs: delayed allocation enabled
[   57.335749] EXT4-fs: file extents enabled
[   57.335819] EXT4-fs: mballoc enabled
[   57.335840] EXT4-fs: mounted filesystem dm-0 with ordered data mode
[   57.865567] i2c-adapter i2c-1: unable to read EDID block.
[   57.958770] i2c-adapter i2c-1: unable to read EDID block.
[   58.001133] i915 0000:00:02.0: LVDS-1: no EDID data
[   58.050515] i2c-adapter i2c-1: unable to read EDID block.
[   58.138568] i2c-adapter i2c-1: unable to read EDID block.
[   58.181151] i915 0000:00:02.0: LVDS-1: no EDID data
[  294.509315] exe[2170]: segfault at c ip b7684333 sp bf86a9a0 error 4 in libplds4.so[b7683000+3000]
[  294.509466] exe used greatest stack depth: 5500 bytes left
[  318.089566] chrome used greatest stack depth: 5384 bytes left



0 件のコメント :

コメントを投稿

Comments on Google+: