Ubuntu Linuxでのdmesgの出力

2010/09/04

BX407A4

t f B! P L
記事内に広告が含まれています。

UbuntuをインストールしたUSBメモリから起動してみた。無線LANが使えないし、画面の横にある光学トラックボール?やマウスボタンが使えない。画面の解像度の認識も適切でなく、横に引き伸ばした感じ。ちゃんと設定する必要があるなぁ。dmesgの出力を貼り付けてみる。


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:22:14 UTC 2010 (Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f680000 (usable)
[    0.000000]  BIOS-e820: 000000001f680000 - 000000001f690000 (reserved)
[    0.000000]  BIOS-e820: 000000001f690000 - 000000001f69e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001f69e000 - 000000001f6d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001f6d0000 - 000000001f6e0000 (reserved)
[    0.000000]  BIOS-e820: 000000001f6e8000 - 000000001f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x1f680 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0E0000000 write-back
[    0.000000]   1 base 01F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 01F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000001f680000 (usable)
[    0.000000]  modified: 000000001f680000 - 000000001f690000 (reserved)
[    0.000000]  modified: 000000001f690000 - 000000001f69e000 (ACPI data)
[    0.000000]  modified: 000000001f69e000 - 000000001f6d0000 (ACPI NVS)
[    0.000000]  modified: 000000001f6d0000 - 000000001f6e0000 (reserved)
[    0.000000]  modified: 000000001f6e8000 - 000000001f800000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-000000001f680000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 001f680000 page 4k
[    0.000000] kernel direct mapping tables up to 1f680000 @ 10000-91000
[    0.000000] RAMDISK: 17186000 - 1791f7ea
[    0.000000] ACPI: RSDP 000f8ec0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 1f690100 0005C (v01 011310 XSDT1744 20100113 MSFT 00000097)
[    0.000000] ACPI: FACP 1f690290 000F4 (v04 011310 FACP1744 20100113 MSFT 00000097)
[    0.000000] ACPI: DSDT 1f690430 03FF5 (v02  2UMEM 2UMEM039 00000039 INTL 20051117)
[    0.000000] ACPI: FACS 1f69e000 00040
[    0.000000] ACPI: APIC 1f690390 0005C (v02 011310 APIC1744 20100113 MSFT 00000097)
[    0.000000] ACPI: MCFG 1f6903f0 0003C (v01 011310 OEMMCFG  20100113 MSFT 00000097)
[    0.000000] ACPI: OEMB 1f69e040 0012C (v01 011310 OEMB1744 20100113 MSFT 00000097)
[    0.000000] ACPI: HPET 1f694430 00038 (v01 011310 OEMHPET  20100113 MSFT 00000097)
[    0.000000] ACPI: GSCI 1f69e170 02024 (v01 011310 GMCHSCI  20100113 MSFT 00000097)
[    0.000000] ACPI: SSDT 1f6a0ba0 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 502MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1f680000
[    0.000000]   low ram: 0 - 1f680000
[    0.000000]   node 0 low ram: 00000000 - 1f680000
[    0.000000]   node 0 bootmap 0008b000 - 0008eed0
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001f680000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008dbeb8]    TEXT DATA BSS ==> [0000100000 - 00008dbeb8]
[    0.000000]   #4 [0017186000 - 001791f7ea]          RAMDISK ==> [0017186000 - 001791f7ea]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00008dc000 - 00008df153]              BRK ==> [00008dc000 - 00008df153]
[    0.000000]   #7 [0000010000 - 000008b000]          PGTABLE ==> [0000010000 - 000008b000]
[    0.000000]   #8 [000008b000 - 000008f000]          BOOTMAP ==> [000008b000 - 000008f000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001f680
[    0.000000]   HighMem  0x0001f680 -> 0x0001f680
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001f680
[    0.000000] On node 0 totalpages: 128527
[    0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1001200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 973 pages used for memmap
[    0.000000]   Normal zone: 123571 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x908
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 1f800000 (gap: 1f800000:df600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c13f5000 s36056 r0 d21288 u65536
[    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127522
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=cead2bbe-087f-4d28-814e-7753f512e171 ro quiet splash
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2572480 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 490432k/514560k available (4679k kernel code, 23432k reserved, 2116k data, 660k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xdfe80000 - 0xff7fe000   ( 505 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf680000   ( 502 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0848000   ( 660 kB)
[    0.000000]       .data : 0xc0591d23 - 0xc07a2e88   (2116 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0591d23   (4679 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1200.028 MHz processor.
[    0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 2400.05 BogoMIPS (lpj=4800112)
[    0.004068] Security Framework initialized
[    0.004135] AppArmor: AppArmor initialized
[    0.004158] Mount-cache hash table entries: 512
[    0.004503] Initializing cgroup subsys ns
[    0.004517] Initializing cgroup subsys cpuacct
[    0.004530] Initializing cgroup subsys memory
[    0.004551] Initializing cgroup subsys devices
[    0.004559] Initializing cgroup subsys freezer
[    0.004567] Initializing cgroup subsys net_cls
[    0.004613] Atom PSE erratum detected, BIOS microcode update recommended
[    0.004627] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004636] CPU: L2 cache: 512K
[    0.004645] CPU: Physical Processor ID: 0
[    0.004651] CPU: Processor Core ID: 0
[    0.004661] mce: CPU supports 5 MCE banks
[    0.004682] CPU0: Thermal monitoring handled by SMI
[    0.004693] using mwait in idle threads.
[    0.004712] Performance Events: Atom events, Intel PMU driver.
[    0.004759] ... version:                3
[    0.004765] ... bit width:              40
[    0.004771] ... generic registers:      2
[    0.004778] ... value mask:             000000ffffffffff
[    0.004785] ... max period:             000000007fffffff
[    0.004792] ... fixed-purpose events:   3
[    0.004799] ... event mask:             0000000700000003
[    0.004810] Checking 'hlt' instruction... OK.
[    0.020018] Disabling 4MB page tables to avoid TLB bug
[    0.027050] ACPI: Core revision 20090903
[    0.048054] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.048080] ftrace: allocating 21780 entries in 43 pages
[    0.052174] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.052576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.094532] CPU0: Intel(R) Atom(TM) CPU Z515   @ 1.20GHz stepping 02
[    0.096001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 0
[    0.008000] CPU1: Thermal monitoring handled by SMI
[    0.180106] CPU1: Intel(R) Atom(TM) CPU Z515   @ 1.20GHz stepping 02
[    0.180149] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.184061] Brought up 2 CPUs
[    0.184071] Total of 2 processors activated (4799.89 BogoMIPS).
[    0.184395] CPU0 attaching sched-domain:
[    0.184411]  domain 0: span 0-1 level SIBLING
[    0.184419]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.184436]   domain 1: span 0-1 level MC
[    0.184444]    groups: 0-1 (cpu_power = 1178)
[    0.184462] CPU1 attaching sched-domain:
[    0.184468]  domain 0: span 0-1 level SIBLING
[    0.184475]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.184490]   domain 1: span 0-1 level MC
[    0.184497]    groups: 0-1 (cpu_power = 1178)
[    0.184863] devtmpfs: initialized
[    0.184863] regulator: core version 0.5
[    0.184863] Time: 18:58:55  Date: 09/04/10
[    0.184863] NET: Registered protocol family 16
[    0.184863] Trying to unpack rootfs image as initramfs...
[    0.184863] EISA bus registered
[    0.184863] ACPI: bus type pci registered
[    0.185056] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.185070] PCI: Not using MMCONFIG.
[    0.185440] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=0
[    0.185449] PCI: Using configuration type 1 for base access
[    0.192395] bio: create slab  at 0
[    0.195143] ACPI: EC: Look up EC in DSDT
[    0.198370] ACPI: Executed 1 blocks of module-level executable AML code
[    0.707833] Freeing initrd memory: 7781k freed
[    1.206603] ACPI: Interpreter enabled
[    1.206603] ACPI: (supports S0 S3 S4 S5)
[    1.206603] ACPI: Using IOAPIC for interrupt routing
[    1.206603] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    1.213823] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    1.213832] PCI: Using MMCONFIG for extended config space
[    1.222328] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    1.227121] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
[    1.227335] ACPI: Power Resource [PFAN] (on)
[    1.228736] ACPI Warning: Incorrect checksum in table [GSCI] - 0F, should be 11 (20090903/tbutils-314)
[    1.229034] ACPI: No dock devices found.
[    1.229463] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    1.229714] pci 0000:00:02.0: reg 10 32bit mmio: [0xdff80000-0xdfffffff]
[    1.229730] pci 0000:00:02.0: reg 14 io port: [0xe880-0xe887]
[    1.229744] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xd7ffffff]
[    1.229759] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdff60000-0xdff7ffff]
[    1.229915] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdff5c000-0xdff5ffff]
[    1.229981] pci 0000:00:1b.0: PME# supported from D0 D3hot
[    1.229991] pci 0000:00:1b.0: PME# disabled
[    1.230059] pci 0000:00:1d.0: reg 20 io port: [0xe480-0xe49f]
[    1.230135] pci 0000:00:1d.1: reg 20 io port: [0xe080-0xe09f]
[    1.230212] pci 0000:00:1d.2: reg 20 io port: [0xef00-0xef1f]
[    1.230315] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdff5bc00-0xdff5bfff]
[    1.230415] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    1.230426] pci 0000:00:1d.7: PME# disabled
[    1.230472] pci 0000:00:1e.0: reg 10 32bit mmio: [0xdff5b800-0xdff5b8ff]
[    1.230553] pci 0000:00:1e.1: reg 10 32bit mmio: [0xdff5b400-0xdff5b4ff]
[    1.230634] pci 0000:00:1e.2: reg 10 32bit mmio: [0xdff5b000-0xdff5b0ff]
[    1.230814] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[    1.230862] pci_bus 0000:00: on NUMA node 0
[    1.230877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.245721] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    1.246002] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.246280] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    1.246556] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    1.246832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.247112] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.247391] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.247671] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.248002] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.248026] vgaarb: loaded
[    1.248430] SCSI subsystem initialized
[    1.248583] libata version 3.00 loaded.
[    1.248583] usbcore: registered new interface driver usbfs
[    1.248583] usbcore: registered new interface driver hub
[    1.248583] usbcore: registered new device driver usb
[    1.248583] ACPI: WMI: Mapper loaded
[    1.248583] PCI: Using ACPI for IRQ routing
[    1.248583] NetLabel: Initializing
[    1.248583] NetLabel:  domain hash size = 128
[    1.248583] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.248592] NetLabel:  unlabeled traffic allowed by default
[    1.248703] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.248719] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    1.256041] Switching to clocksource tsc
[    1.261111] AppArmor: AppArmor Filesystem Enabled
[    1.261174] pnp: PnP ACPI init
[    1.261236] ACPI: bus type pnp registered
[    1.267147] pnp: PnP ACPI: found 14 devices
[    1.267155] ACPI: ACPI bus type pnp unregistered
[    1.267166] PnPBIOS: Disabled by ACPI PNP
[    1.267205] system 00:01: iomem range 0x20000000-0x7fffffff has been reserved
[    1.267216] system 00:01: iomem range 0x1f800000-0x1fffffff could not be reserved
[    1.267242] system 00:07: ioport range 0x374-0x375 has been reserved
[    1.267252] system 00:07: ioport range 0x3f4-0x3f5 has been reserved
[    1.267262] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    1.267271] system 00:07: ioport range 0x9f4-0x9ff has been reserved
[    1.267280] system 00:07: ioport range 0x900-0x9f3 has been reserved
[    1.267290] system 00:07: ioport range 0x400-0x43f has been reserved
[    1.267299] system 00:07: ioport range 0x480-0x4bf has been reserved
[    1.267310] system 00:07: iomem range 0xf0000000-0xf0003fff has been reserved
[    1.267337] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[    1.267347] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    1.267366] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[    1.267385] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    1.267395] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[    1.267405] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    1.267415] system 00:0d: iomem range 0x100000-0x1f7fffff could not be reserved
[    1.302526] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.302536] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    1.302651] NET: Registered protocol family 2
[    1.302944] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    1.303808] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    1.303969] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    1.304119] TCP: Hash tables configured (established 16384 bind 16384)
[    1.304127] TCP reno registered
[    1.304343] NET: Registered protocol family 1
[    1.304398] pci 0000:00:02.0: Boot video device
[    1.305117] cpufreq-nforce2: No nForce2 chipset.
[    1.305201] Scanning for low memory corruption every 60 seconds
[    1.305536] audit: initializing netlink socket (disabled)
[    1.305566] type=2000 audit(1283626736.304:1): initialized
[    1.329438] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.334394] VFS: Disk quotas dquot_6.5.2
[    1.334574] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.336577] fuse init (API version 7.13)
[    1.336858] msgmni has been set to 973
[    1.337603] alg: No test for stdrng (krng)
[    1.337797] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.337807] io scheduler noop registered
[    1.337814] io scheduler anticipatory registered
[    1.337820] io scheduler deadline registered
[    1.337974] io scheduler cfq registered (default)
[    1.338255] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.338331] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.338838] ACPI: AC Adapter [AC] (on-line)
[    1.339077] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.339090] ACPI: Sleep Button [SLPB]
[    1.339222] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.339232] ACPI: Power Button [PWRB]
[    1.339368] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.339655] ACPI: Lid Switch [LID]
[    1.340149] fan PNP0C0B:00: registered as cooling_device0
[    1.340174] ACPI: Fan [FAN0] (on)
[    1.341697] ACPI: SSDT 1f6a0270 0023C (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    1.342841] ACPI: SSDT 1f6a0540 0065D (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    1.344398] Monitor-Mwait will be used to enter C-1 state
[    1.344524] Monitor-Mwait will be used to enter C-2 state
[    1.344615] Monitor-Mwait will be used to enter C-3 state
[    1.344706] Monitor-Mwait will be used to enter C-3 state
[    1.344738] Marking TSC unstable due to TSC halts in idle
[    1.344862] Switching to clocksource hpet
[    1.345134] processor LNXCPU:00: registered as cooling_device1
[    1.346214] ACPI: SSDT 1f6a01a0 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    1.346966] ACPI: SSDT 1f6a04b0 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    1.348989] processor LNXCPU:01: registered as cooling_device2
[    1.353828] ACPI Warning for \_TZ_.TZ01._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012)
[    1.353854] ACPI: Expecting a [Reference] package element, found type C
[    1.353861] ACPI: Invalid passive threshold
[    1.355018] thermal LNXTHERM:01: registered as thermal_zone0
[    1.355043] ACPI: Thermal Zone [TZ01] (53 C)
[    1.355949] isapnp: Scanning for PnP cards...
[    1.361609] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.366928] brd: module loaded
[    1.369006] loop: module loaded
[    1.369376] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    1.369981] pata_acpi 0000:00:1f.1: setting latency timer to 64
[    1.371300] Fixed MDIO Bus: probed
[    1.371486] PPP generic driver version 2.4.2
[    1.371617] tun: Universal TUN/TAP device driver, 1.6
[    1.371625] tun: (C) 1999-2004 Max Krasnyansky 
[    1.371930] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.371993]   alloc irq_desc for 19 on node -1
[    1.372003]   alloc kstat_irqs on node -1
[    1.372064] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.372115] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.372127] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.372268] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.372351] ehci_hcd 0000:00:1d.7: debug port 1
[    1.376256] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.376306] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdff5bc00
[    1.380796] ACPI: Battery Slot [BAT0] (battery present)
[    1.392053] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.392413] usb usb1: configuration #1 chosen from 1 choice
[    1.392531] hub 1-0:1.0: USB hub found
[    1.392564] hub 1-0:1.0: 8 ports detected
[    1.392785] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.392845] uhci_hcd: USB Universal Host Controller Interface driver
[    1.392953]   alloc irq_desc for 16 on node -1
[    1.392962]   alloc kstat_irqs on node -1
[    1.392981] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.393002] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.393013] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.393159] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.393228] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e480
[    1.393573] usb usb2: configuration #1 chosen from 1 choice
[    1.393681] hub 2-0:1.0: USB hub found
[    1.393708] hub 2-0:1.0: 2 ports detected
[    1.393873]   alloc irq_desc for 17 on node -1
[    1.393882]   alloc kstat_irqs on node -1
[    1.393898] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.393916] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.393927] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.394060] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.394129] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e080
[    1.394471] usb usb3: configuration #1 chosen from 1 choice
[    1.394578] hub 3-0:1.0: USB hub found
[    1.394605] hub 3-0:1.0: 2 ports detected
[    1.394758]   alloc irq_desc for 18 on node -1
[    1.394767]   alloc kstat_irqs on node -1
[    1.394783] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.394801] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.394811] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.394941] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.395005] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef00
[    1.395342] usb usb4: configuration #1 chosen from 1 choice
[    1.395450] hub 4-0:1.0: USB hub found
[    1.395476] hub 4-0:1.0: 2 ports detected
[    1.395830] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.399956] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.401487] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.401515] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.401626] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.401726] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.401823] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.402297] mice: PS/2 mouse device common for all mice
[    1.402821] rtc_cmos 00:02: RTC can wake from S4
[    1.402975] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.403026] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.403505] device-mapper: uevent: version 1.0.3
[    1.403913] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.404230] device-mapper: multipath: version 1.1.0 loaded
[    1.404240] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.404716] EISA: Probing bus 0 at eisa.0
[    1.404794] EISA: Detected 0 cards.
[    1.405457] cpuidle: using governor ladder
[    1.405956] cpuidle: using governor menu
[    1.407675] TCP cubic registered
[    1.408375] NET: Registered protocol family 10
[    1.410099] lo: Disabled Privacy Extensions
[    1.411308] NET: Registered protocol family 17
[    1.413412] Using IPI No-Shortcut mode
[    1.413806] PM: Resume from disk failed.
[    1.413848] registered taskstats version 1
[    1.414385]   Magic number: 10:669:998
[    1.414472] pnp 00:00: hash matches
[    1.414575] rtc_cmos 00:02: setting system clock to 2010-09-04 18:58:56 UTC (1283626736)
[    1.414587] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.414595] EDD information not available.
[    1.427516] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.712813] isapnp: No Plug & Play device found
[    1.712911] Freeing unused kernel memory: 660k freed
[    1.713967] Write protecting the kernel text: 4680k
[    1.714078] Write protecting the kernel read-only data: 1840k
[    1.741140] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    1.768502] udev: starting version 151
[    1.874920] usb 1-3: configuration #1 chosen from 1 choice
[    1.984147] usb 1-7: new high speed USB device using ehci_hcd and address 3
[    2.066966] Initializing USB Mass Storage driver...
[    2.078770] pata_sch 0000:00:1f.1: version 0.2
[    2.078912] pata_sch 0000:00:1f.1: setting latency timer to 64
[    2.092663] scsi1 : pata_sch
[    2.109240] scsi0 : SCSI emulation for USB Mass Storage devices
[    2.126265] scsi2 : pata_sch
[    2.127889] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    2.127903] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    2.135269] usb 1-7: configuration #1 chosen from 1 choice
[    2.138802] usbcore: registered new interface driver usb-storage
[    2.138822] USB Mass Storage support registered.
[    2.138851] usb-storage: device found at 2
[    2.138859] usb-storage: waiting for device to settle before scanning
[    2.292760] ata1.00: ATA-7: SM2231
[    2.292765] , 20090521, max UDMA/100
[    2.292776] ata1.00: 62537728 sectors, multi 0: LBA 
[    2.308767] ata1.00: configured for UDMA/100
[    2.309227] scsi 1:0:0:0: Direct-Access     ATA      SM2231           2009 PQ: 0 ANSI: 5
[    2.309871] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.309983] sd 1:0:0:0: [sda] 62537728 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    2.310401] sd 1:0:0:0: [sda] Write Protect is off
[    2.310416] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.310552] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.311127]  sda: sda1 sda2
[    2.313868] sd 1:0:0:0: [sda] Attached SCSI disk
[    7.137089] usb-storage: device scan complete
[    7.138443] scsi 0:0:0:0: Direct-Access              USB Reader       0001 PQ: 0 ANSI: 0 CCS
[    7.140711] sd 0:0:0:0: Attached scsi generic sg1 type 0
[    8.184651] sd 0:0:0:0: [sdb] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB)
[    8.187530] sd 0:0:0:0: [sdb] Write Protect is off
[    8.187546] sd 0:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    8.187554] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    8.190546] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    8.190560]  sdb: sdb1 sdb2 < sdb5 >
[    8.197328] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    8.197349] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[    8.361652] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[   15.803287] udev: starting version 151
[   15.902202] lp: driver loaded but no devices found
[   16.073260] vga16fb: initializing
[   16.073278] vga16fb: mapped to 0xc00a0000
[   16.073506] fb0: VGA16 VGA frame buffer device
[   16.133077] sdhci: Secure Digital Host Controller Interface driver
[   16.133091] sdhci: Copyright(c) Pierre Ossman
[   16.201362] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:811c] (rev 7)
[   16.201400] sdhci-pci 0000:00:1e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.202484] sdhci-pci 0000:00:1e.0: setting latency timer to 64
[   16.202648] Registered led device: mmc0::
[   16.202781] mmc0: SDHCI controller on PCI [0000:00:1e.0] using DMA
[   16.202868] sdhci-pci 0000:00:1e.1: SDHCI controller found [8086:811d] (rev 7)
[   16.202901] sdhci-pci 0000:00:1e.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   16.202962] sdhci-pci 0000:00:1e.1: setting latency timer to 64
[   16.203066] Registered led device: mmc1::
[   16.203153] mmc1: SDHCI controller on PCI [0000:00:1e.1] using DMA
[   16.203188] sdhci-pci 0000:00:1e.2: SDHCI controller found [8086:811e] (rev 7)
[   16.203211] sdhci-pci 0000:00:1e.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   16.203256] sdhci-pci 0000:00:1e.2: setting latency timer to 64
[   16.203354] Registered led device: mmc2::
[   16.203460] mmc2: SDHCI controller on PCI [0000:00:1e.2] using DMA
[   16.285228] mmc0: new SDIO card at address 0001
[   16.745199] Linux video capture interface: v2.00
[   16.835709] psmouse serio4: ID: 00 03 c8
[   16.836463] usb 3-2: new full speed USB device using uhci_hcd and address 2
[   16.892706] mmc1: new high speed SDHC card at address 1234
[   16.977928] mmcblk0: mmc1:1234 SA04G 3.68 GiB 
[   16.978183]  mmcblk0: p1
[   17.034397] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3450)
[   17.054282] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/input/input5
[   17.054553] usbcore: registered new interface driver uvcvideo
[   17.054570] USB Video Class driver (v0.1.0)
[   17.112317] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input6
[   17.149683] lib80211: common routines for IEEE802.11 drivers
[   17.149695] lib80211_crypt: registered algorithm 'NULL'
[   17.256763] usb 3-2: configuration #1 chosen from 1 choice
[   17.321306] libertas_sdio: Libertas SDIO driver
[   17.321316] libertas_sdio: Copyright Pierre Ossman
[   17.373327] libertas_sdio mmc0:0001:1: firmware: requesting sd8686_helper.bin
[   17.441546] Bluetooth: Core ver 2.15
[   17.450732] NET: Registered protocol family 31
[   17.450742] Bluetooth: HCI device and connection manager initialized
[   17.450752] Bluetooth: HCI socket layer initialized
[   17.484323] libertas: can't load helper firmware
[   17.484333] libertas: failed to load helper firmware
[   17.485920] Console: switching to colour frame buffer device 80x30
[   17.501299] libertas_sdio: probe of mmc0:0001:1 failed with error -2
[   17.513841] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   17.515421] usbcore: registered new interface driver btusb
[   17.542324] type=1505 audit(1283626752.625:2):  operation="profile_load" pid=610 name="/sbin/dhclient3"
[   17.543381] type=1505 audit(1283626752.625:3):  operation="profile_load" pid=610 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   17.544080] type=1505 audit(1283626752.625:4):  operation="profile_load" pid=610 name="/usr/lib/connman/scripts/dhclient-script"
[   18.092581] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.092694] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   18.295977] hda_codec: ALC262: BIOS auto-probing.
[   18.297283] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   18.347832] type=1505 audit(1283626753.429:5):  operation="profile_load" pid=715 name="/usr/share/gdm/guest-session/Xsession"
[   18.374503] type=1505 audit(1283626753.457:6):  operation="profile_replace" pid=718 name="/sbin/dhclient3"
[   18.375604] type=1505 audit(1283626753.457:7):  operation="profile_replace" pid=718 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   18.396353] type=1505 audit(1283626753.481:8):  operation="profile_replace" pid=718 name="/usr/lib/connman/scripts/dhclient-script"
[   18.432841] type=1505 audit(1283626753.517:9):  operation="profile_load" pid=719 name="/usr/bin/evince"
[   18.458935] type=1505 audit(1283626753.541:10):  operation="profile_load" pid=719 name="/usr/bin/evince-previewer"
[   18.478311] type=1505 audit(1283626753.561:11):  operation="profile_load" pid=719 name="/usr/bin/evince-thumbnailer"
[   19.316026] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x020c0000
[   20.320060] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x022f000e
[   26.583325] CPU0 attaching NULL sched-domain.
[   26.583352] CPU1 attaching NULL sched-domain.
[   26.617284] CPU0 attaching sched-domain:
[   26.617303]  domain 0: span 0-1 level SIBLING
[   26.617316]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   26.617340]   domain 1: span 0-1 level MC
[   26.617350]    groups: 0-1 (cpu_power = 1178)
[   26.617374] CPU1 attaching sched-domain:
[   26.617383]  domain 0: span 0-1 level SIBLING
[   26.617393]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   26.617415]   domain 1: span 0-1 level MC
[   26.617425]    groups: 0-1 (cpu_power = 1178)
[   27.627145] hda-intel: Invalid position buffer, using LPIB read method instead.
[   27.627257] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[   82.743374] Bluetooth: L2CAP ver 2.14
[   82.743390] Bluetooth: L2CAP socket layer initialized
[   82.772417] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   82.772432] Bluetooth: BNEP filters: protocol multicast
[   82.796173] ppdev: user-space parallel port driver
[   82.814027] Bridge firewalling registered
[   82.857727] Bluetooth: SCO (Voice Link) ver 0.6
[   82.857741] Bluetooth: SCO socket layer initialized
[   83.160187] Bluetooth: RFCOMM TTY layer initialized
[   83.160212] Bluetooth: RFCOMM socket layer initialized
[   83.160221] Bluetooth: RFCOMM ver 1.11

楽天で探す
楽天市場
にほんブログ村 IT技術ブログへ

人気の投稿

ブログ アーカイブ

自己紹介

パワハラをなぁなぁで済まそうとする奴がCxOやっている会社を辞めました。ストックオプションは半分しか行使できなかったけど、あんな人たちには関わりたくないですね。

アフィリエイト

  • 当ブログ「Hiroaki's blog」は、amazon.co.jpを宣伝しリンクすることによってサイトが紹介料を獲得できる手段を提供することを目的に設定されたアフィリエイト宣伝プログラムである、Amazonアソシエイト・プログラムの参加者です。
  • 当ブログでは、第三者配信による広告サービスを利用しています。このような広告配信事業者は、ユーザーの興味に応じた商品やサービスの広告を表示するため、当サイトや他サイトへのアクセスに関する情報 (氏名、住所、メール アドレス、電話番号は含まれません) を使用することがあります。このプロセスの詳細やこのような情報が広告配信事業者に使用されないようにする方法については、ここをクリックしてください。
  • アクセストレードアフィリエイトプログラムに参加しています。
  • A8.netアフィリエイトプログラムに参加しています。
  • バリューコマースアフィリエイトプログラムに参加しています。
  • もしもアフィリエイトプログラムに参加しています。

プライバシーポリシー

当サイトにアクセスされる場合、IPアドレスなどの情報または閲覧状況に関するデータが機械的に生成され、場合によっては個人情報と関連付けられる可能性があります。プライバシー保護に関する適用法に準じて、これらの通信および閲覧に関するデータを収集、処理、および利用することがあります。
当サイトにアクセスされる場合、非個人情報(ブラウザの種類、OSの種類、ドメイン名、訪問数、平均滞在時間、ページ・ビューなど個人を特定できない情報)が自動収集される場合があります。当サイトのパフォーマンスやコンテンツを改善する目的で、これらの情報を利用する場合があります。
アフィリエイトでは成果を把握するためにcookie等を利用しています。それ以外の目的で使用されることはありません。詳しくは各社のページにて確認してください。
本サイトに掲載する情報に関しては、正しいものを提供することを務めていますが、掲載内容から、いかなる損失や損害などの被害が発生しても、当ブログでは責任を追いかねます。

改正電気通信事業法に関する表記

・掲載内容

当サイトでは成果報酬型広告/クリック型広告の効果測定のため、利用者の方のアクセス情報を外部事業者に送信しております。
当該の情報は個人を特定する情報ではございません。また当該の情報が目的外利用される事は一切御座いません。

1.送信される情報の内容
  • 広告の表示日時
  • 広告のクリック日時
  • 広告の計測に必要なクッキー情報
  • 広告表示時及び広告クリック時のIPアドレス
  • 広告表示時及び広告クリック時に使用されたインターネット端末およびインターネットブラウザの種類
2.送信先となる事業者の氏名又は名称
  • グーグル合同会社
  • 楽天グループ株式会社
  • アマゾンジャパン合同会社
  • ヤフー株式会社
  • 株式会社ファンコミュニケーションズ
  • 株式会社もしも
3.利用目的

成果報酬型広告/クリック型広告の効果測定および不正防止のため

QooQ